WorkSafeBC Regulations

WSBCPart 16 of the WorkSafeBC Occupational Health & Safety Regulation, Mobile Equipment requires that Lift Truck Operator training meets the requirements of the CSA Standard B335-94, Industrial Lift Truck Operator Training and that Rough Terrain Forklift Operator training meets ANSI/ITSDF Standard B56.6, Safety Standard for Rough Terrain Forklift Trucks.  WorkSafeBC has published a specifiic webpage on the training of Forklift Operators, which can be accessed here.

Aerial Lift Operator training must meet ANSI/SAIA Standard A92.5, Boom-Supported Elevating Work Platforms, and ANSI/SAIA Standard A92.6, Self-Propelled Elevating Work Platforms.

Part 11 of the WorkSafeBC Occupational Health & Safety Regulation, Fall Protection requires that a fall protection system is used when work is being done at a place from which a fall of 3 m (10 ft) or more may occur, or where a fall from a height of less than 3 m involves a risk of injury greater than the risk of injury from the impact on a flat surface, and that before a worker is allowed into an area where a risk of falling exists, the employer must ensure that the worker is instructed in the fall protection system for the area and the procedures to be followed.

© 2020 Griffith Forklift Training.  All rights reserved.    Website Designed and Managed by JSA Web Design